Oberon Community Platform Forum
November 22, 2019, 05:48:45 PM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News:
 
   Home   Help Search Login Register  
Pages: [1]
  Print  
Author Topic: AOS (rev. 1239) often reboots during boot process  (Read 10774 times)
sage
Full Member
***
Posts: 170



WWW
« on: June 10, 2008, 11:01:45 PM »

AOS (rev. 1239) often reboots during boot process, but sometimes boots successfully.
Trace output:
Quote
Aos 02.06.2008 (Revision 1239)
Intel MP Spec 1.4
 Processor 0, APIC014, ver 15.4.3, features -40140401, ID 0
P0 starting P1P1 running
, P0 recognized P1
P1schedulingKernel: Initialized and started.
{C cpuiing0onpid=ne1 Pta:
s interface initialized.}
AosATADisks: Force PIO mode for ATAPI devices
AosATADisks: Scanning PCI bus for IDE & SATA class devices ...
AosATADisks: Found PCI device on bus 0, device 31, function 1
AosATADisks: Adding controller 01F0, 03F0, FFA0, IRQ: 14: IDE0..1, Bus-master enabled
AosATADisks: Adding controller 0170, 0370, FFA8, IRQ: 15: IDE2..3, Bus-master enabledAosATADisks: Could not select device
AosATADisks: Could not select device

AosATADisks: Found PCI device on bus 0, device 31, function 2
AosATADisks: Adding controller 4800, 4400, 3400, IRQ: 10: IDE4..5, Bus-master enabled
AosATADisks: Adding controller 4000, 3800, 3408, IRQ: 10: IDE6..7, Bus-master enabled
On this point reboot happens...

On successfull boot the following specs obtained:
AosCPUID.ShowDetailed~
Quote
Standard Function 0: Processor Vendor and Largest Standard Function:

   Vendor: GenuineIntel

   Largest Standard Function: 5



Standard Function 1: Family, Model, Stepping Identifiers:

   Family: 0FH, Model: 04H, Stepping: 03H, type: 3 (Intel reserved)

   Local APIC Initial ID: 0, Logical processor count: 2

   CLFLUSH line size: 64 Bytes, BrandId: 0

   Features: [xTPR][CMPXCHG16B][CID][EST][DS_CPL][MONITOR][SSE3][DTES64][PBE][TM][HTT][SelfSnoop][SSE2][SSE][FXSR][MMX][ACPI][DebugStore][CLFLUSH][PSE36][PAT][CMOV][MCA][PGE][MTRR][SysEnterSysExit][APIC][CMPXCH8B][MCE][PAE][MSR][TSC][PSE][DE][VME][FPU]



Standard Function 2: Cache Descriptors:

Instruction TLB: 4KB, 2MB or 4MB pages, fully associative, 64 entries

Data TLB: 4KB or 4MB pages, fully associative, 64 entries

L1 data cache, 16KB, 8-way set associative, sectored cache, 64-byte line size

No L2 cache or, if processor contains valid L2 cache, no L2 cache

Trace cache: 12 Kuops, 8-way set associative

L2 cache, 2MB, 8-way set associative, 64-byte line size

INTEL Standard Function 4: Deterministic Cache Parameters :

******* Standart Function-4 *********

CoresPerPackage: 1

threadsPerCache: 2

inclusive: 0

fullassoc: 0

selfinit: 1

CacheLevel: 1

CacheType: 1

waysofassoc: 8

physlinepart: 1

syscoherline: 64

numofsets: 32

prefetchstride: 0

This Cache Size (Bytes) : 16384

******* *********



Extended Function 0: Largest Extended Function:

   Largest Extended Function: 8



Extended Function 1: Features:

   Extended features: [LongMode]



Extended Function 2-4: Processor Name:

   Processor Name:               Intel(R) Pentium(R) 4 CPU 3.40GHz



INTEL Extended Function 6: L2 Cache  Features:

   Level 2 cache:

      Size: 2048KB, 8-way associative, Line size: 64 Bytes



Extended Function 8: Long Mode Address Size Identifiers:

   Maximum linear byte address size: 48 bits

   Maximum physical byte address size: 36 bits

AosPCITools.Scan~
Quote
PCI bus enumeration:

Bus 0, device 0, function 0: class/rev 06000081, vendor/device 80862774, status/cmd 20900006

   Class: Bridge, Sub-class: Host bridge

   Vendor: Intel Corporation, Device: 82955X Memory Controller Hub

   Driver: n/a



Bus 0, device 1, function 0: class/rev 06040081, vendor/device 80862775, status/cmd 00100107

   Class: Bridge, Sub-class: PCI bridge, ProgIntfc: Normal decode

   Vendor: Intel Corporation, Device: 82955X PCI Express Root Port

   Driver: n/a

      IRQ11, INTA



Bus 8, device 0, function 0: class/rev 030000A1, vendor/device 10DE0092, status/cmd 00100007

   Class: Display controller, Sub-class: VGA compatible controller, ProgIntfc: VGA controller

   Vendor: nVidia Corporation, Device: G70 [GeForce 7800 GT]

   Driver: n/a

      IRQ11, INTA

      16MB 32-bit memory at CF000000-CFFFFFFF

      256MB prefetchable 64-bit memory at D0000000-DFFFFFFF

      16MB 64-bit memory at CE000000-CEFFFFFF

      128B I/O at 0000E800-0000E87F

      ROM atCDFE0000



Bus 0, device 27, function 0: class/rev 04030001, vendor/device 808627D8, status/cmd 00100006

   Class: Multimedia controller, Sub-class: Audio device

   Vendor: Intel Corporation, Device: 82801G (ICH7 Family) High Definition Audio Controller

   Driver: n/a

      IRQ5, INTA

      16KB 64-bit memory at CDDF8000-CDDFBFFF



Bus 0, device 28, function 0: class/rev 06040001, vendor/device 808627D0, status/cmd 00100107

   Class: Bridge, Sub-class: PCI bridge, ProgIntfc: Normal decode

   Vendor: Intel Corporation, Device: 82801G (ICH7 Family) PCI Express Port 1

   Driver: n/a

      IRQ11, INTA



Bus 0, device 28, function 1: class/rev 06040001, vendor/device 808627D2, status/cmd 00100107

   Class: Bridge, Sub-class: PCI bridge, ProgIntfc: Normal decode

   Vendor: Intel Corporation, Device: 82801G (ICH7 Family) PCI Express Port 2

   Driver: n/a

      IRQ10, INTB



Bus 0, device 28, function 2: class/rev 06040001, vendor/device 808627D4, status/cmd 00100107

   Class: Bridge, Sub-class: PCI bridge, ProgIntfc: Normal decode

   Vendor: Intel Corporation, Device: 82801G (ICH7 Family) PCI Express Port 3

   Driver: n/a

      IRQ3, INTC



Bus 0, device 28, function 3: class/rev 06040001, vendor/device 808627D6, status/cmd 00100107

   Class: Bridge, Sub-class: PCI bridge, ProgIntfc: Normal decode

   Vendor: Intel Corporation, Device: 82801G (ICH7 Family) PCI Express Port 4

   Driver: n/a

      IRQ5, INTD



Bus 0, device 28, function 4: class/rev 06040001, vendor/device 808627E0, status/cmd 00100107

   Class: Bridge, Sub-class: PCI bridge, ProgIntfc: Normal decode

   Vendor: Intel Corporation, Device: 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5

   Driver: n/a

      IRQ11, INTA



Bus 0, device 28, function 5: class/rev 06040001, vendor/device 808627E2, status/cmd 00100107

   Class: Bridge, Sub-class: PCI bridge, ProgIntfc: Normal decode

   Vendor: Intel Corporation, Device: 82801GR/GH/GHM (ICH7 Family) PCI Express Port 6

   Driver: n/a

      IRQ10, INTB



Bus 0, device 29, function 0: class/rev 0C030001, vendor/device 808627C8, status/cmd 02800005

   Class: Serial bus controller, Sub-class: USB Controller, ProgIntfc: UHCI

   Vendor: Intel Corporation, Device: 82801G (ICH7 Family) USB UHCI Controller #1

   Driver: AosUsbHubDriver.Install;AosUsbUhci.Install

      IRQ5, INTA

      32B I/O at 00002000-0000201F



Bus 0, device 29, function 1: class/rev 0C030001, vendor/device 808627C9, status/cmd 02800005

   Class: Serial bus controller, Sub-class: USB Controller, ProgIntfc: UHCI

   Vendor: Intel Corporation, Device: 82801G (ICH7 Family) USB UHCI Controller #2

   Driver: AosUsbHubDriver.Install;AosUsbUhci.Install

      IRQ10, INTB

      32B I/O at 00002400-0000241F



Bus 0, device 29, function 2: class/rev 0C030001, vendor/device 808627CA, status/cmd 02800005

   Class: Serial bus controller, Sub-class: USB Controller, ProgIntfc: UHCI

   Vendor: Intel Corporation, Device: 82801G (ICH7 Family) USB UHCI Controller #3

   Driver: AosUsbHubDriver.Install;AosUsbUhci.Install

      IRQ3, INTC

      32B I/O at 00002800-0000281F



Bus 0, device 29, function 3: class/rev 0C030001, vendor/device 808627CB, status/cmd 02800005

   Class: Serial bus controller, Sub-class: USB Controller, ProgIntfc: UHCI

   Vendor: Intel Corporation, Device: 82801G (ICH7 Family) USB UHCI Controller #4

   Driver: AosUsbHubDriver.Install;AosUsbUhci.Install

      IRQ5, INTD

      32B I/O at 00003000-0000301F



Bus 0, device 29, function 7: class/rev 0C032001, vendor/device 808627CC, status/cmd 02900006

   Class: Serial bus controller, Sub-class: USB Controller, ProgIntfc: EHCI

   Vendor: Intel Corporation, Device: 82801G (ICH7 Family) USB2 EHCI Controller

   Driver: AosUsbHubDriver.Install;AosUsbEhci.Install

      IRQ5, INTA

      1KB 32-bit memory at CDDFF800-CDDFFBFF



Bus 0, device 30, function 0: class/rev 060401E1, vendor/device 8086244E, status/cmd 00100107

   Class: Bridge, Sub-class: PCI bridge, ProgIntfc: Subtractive decode

   Vendor: Intel Corporation, Device: 82801 PCI Bridge

   Driver: n/a



Bus 1, device 1, function 0: class/rev 048000F0, vendor/device 11317133, status/cmd 02900006

   Class: Multimedia controller, Sub-class: Multimedia controller

   Vendor: Philips Semiconductors, Device: SAA7133/SAA7135 Video Broadcast Decoder

   Driver: n/a

      IRQ5, INTA

      2KB 32-bit memory at CDEFB000-CDEFB7FF



Bus 1, device 2, function 0: class/rev 02000010, vendor/device 10EC8139, status/cmd 02800007

   Class: Network controller, Sub-class: Ethernet controller

   Vendor: Realtek Semiconductor Co., Ltd., Device: RTL-8139/8139C/8139C+

   Driver: AosRTL8139.Install;AosInitNet.Init

      IRQ10, INTA

      256B I/O at 00005800-000058FF

      256B 32-bit memory at CDEFBC00-CDEFBCFF



Bus 1, device 4, function 0: class/rev 01800011, vendor/device 12838211, status/cmd 02300007

   Class: Mass storage controller, Sub-class: Mass storage controller

   Vendor: Integrated Technology Express, Inc., Device: ITE 8211F Single Channel UDMA 133

   Driver: n/a

      IRQ5, INTA

      8B I/O at 00007400-00007407

      4B I/O at 00007000-00007003

      8B I/O at 00006800-00006807

      4B I/O at 00006400-00006403

      16B I/O at 00006000-0000600F

      ROM atCDEA0000



Bus 1, device 5, function 0: class/rev 02000013, vendor/device 11AB4320, status/cmd 02B00017

   Class: Network controller, Sub-class: Ethernet controller

   Vendor: Marvell Technology Group Ltd., Device: 88E8001 Gigabit Ethernet Controller

   Driver: n/a

      IRQ10, INTA

      16KB 32-bit memory at CDEFC000-CDEFFFFF

      256B I/O at 00007800-000078FF

      ROM atCDEC0000



Bus 0, device 31, function 0: class/rev 06010001, vendor/device 808627B8, status/cmd 02100007

   Class: Bridge, Sub-class: ISA bridge

   Vendor: Intel Corporation, Device: 82801GB/GR (ICH7 Family) LPC Interface Bridge

   Driver: n/a



Bus 0, device 31, function 1: class/rev 01018A01, vendor/device 808627DF, status/cmd 02880005

   Class: Mass storage controller, Sub-class: IDE interface

   Vendor: Intel Corporation, Device: 82801G (ICH7 Family) IDE Controller

   Driver: AosATADisks.Install

      IRQ0, INTA

      8B I/O at 00000000-00000007

      4B I/O at 00000000-00000003

      8B I/O at 00000000-00000007

      4B I/O at 00000000-00000003

      16B I/O at 0000FFA0-0000FFAF



Bus 0, device 31, function 2: class/rev 01018F01, vendor/device 808627C0, status/cmd 02B00007

   Class: Mass storage controller, Sub-class: IDE interface

   Vendor: Intel Corporation, Device: 82801GB/GR/GH (ICH7 Family) SATA IDE Controller

   Driver: AosATADisks.Install

      IRQ10, INTB

      8B I/O at 00004800-00004807

      4B I/O at 00004400-00004403

      8B I/O at 00004000-00004007

      4B I/O at 00003800-00003803

      16B I/O at 00003400-0000340F

      1KB 32-bit memory at CDDFFC00-CDDFFFFF



Bus 0, device 31, function 3: class/rev 0C050001, vendor/device 808627DA, status/cmd 02800001

   Class: Serial bus controller, Sub-class: SMBus

   Vendor: Intel Corporation, Device: 82801G (ICH7 Family) SMBus Controller

   Driver: n/a

      IRQ0, INTB

      32B I/O at 00000400-0000041F



24 devices found
« Last Edit: June 10, 2008, 11:04:43 PM by sage » Logged
sage
Full Member
***
Posts: 170



WWW
« Reply #1 on: June 11, 2008, 08:36:23 AM »

Also always one piece of trace output got corrupted:
Quote
{C cpuiing0onpid=ne1 Pta:
s interface initialized.}
Logged
staubesv
Administrator
Sr. Member
*****
Posts: 387



« Reply #2 on: June 11, 2008, 12:47:23 PM »

Looks like the trace output in I386.Machine.BoopMP must acquire the TraceOutput kernel lock. Could you please try the attached AosIDE.Bin file and report whether it fixes the issue?

* AosIDE.Bin (364.78 KB - downloaded 704 times.)
Logged
sage
Full Member
***
Posts: 170



WWW
« Reply #3 on: June 12, 2008, 07:10:16 PM »

Attached AosIDE.Bin file didn't fixes reboots  Sad
The only change is that previously corrupted output now reads as:
Quote
{P cpuid= 0, pid= -1 PCI: Bus interface initialized.}
And additionally, one observation with original AosIDE.Bin from rev. 1239.
Seems like sometimes in corrupted line can be read "GC working on kernel stack"
With AosIDE.Bin supplied by you this message didn't observed.
« Last Edit: June 12, 2008, 07:14:51 PM by sage » Logged
staubesv
Administrator
Sr. Member
*****
Posts: 387



« Reply #4 on: August 07, 2008, 11:32:56 AM »

Does this still happen with the newest release?
Logged
sage
Full Member
***
Posts: 170



WWW
« Reply #5 on: August 07, 2008, 11:37:33 AM »

I'll try to test it today.
Logged
sage
Full Member
***
Posts: 170



WWW
« Reply #6 on: August 08, 2008, 08:54:24 AM »

Latest revision (1415) of A2 still reboots on some stage of boot process.
Has anyone else the same problems???
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!